Japan Standard Cylinder
HMB Series(φ32-φ100)
Features:
.The important sealing elements are imported from Japan;
.Type PP cushion sealing elements are applied which enjoy the following advantages:
a.In possession of the functions of non-return valve with quick start-up speed of cylinder;
b.In possession of the functions of self-centering with excellent cushion effect and stead cylinder operation which has avoided the up-down movements of piston rod at the end of traveled distance caused by eccentricity;\
Order Example:
.For order of diaΦ50mm, stroke 125mm. single piston rod, basic type cylinder, Correct type:HMBB-50*125
.For order of diaΦ80mm, stroke 100mm. single piston rod, with magnet, double ear seat mounting cylinder, Correct type:HMDBD-80*100
.For order of diaΦ32mm, stroke 150mm. double piston rod, basic type cylinder, Correct type:HMBWB-32*150
.For order of diaΦ100mm, stroke 75mm. Front flange mounting cylinder, Correct type:HMBF-100*75-XC8
| Specification | | | | | |
| CylinderDiameter(mm) | 32 | 40 | 50 | 63 | 80 | 100 |
| Working Medium | Filtered compressed air |
| Acting Mode | Double-acting |
| Ensured Pressure Ressistance | 1.5MPa(15kgf/cm²) |
| Maximum Working-pressure | 1.0MPa(10kgf/cm²) |
| Minimum Working-pressure | 0.1MPa(1kgf/cm²) |
| Ambient and medium temperature | 5-60℃ |
| Cushion | Air cushion |
| Woring Speed | 50-500mm/s |
| Lubrication | Not Requuired |
| Joint Tube Caliber | G1/8 | G1/4 | G3/8 | G1/2 |
| Travel distance error(mm) | Travel distance | 0-250 | 251-750 |
| Error | 0-1 | 0-1.5 |
* In case iubrication is required. Please use turbine No.1 oil ISOVG32.
Magnet Switch choose
| Cylinder Diameter(mm) | Standard Traveled Distance(mm) |
| 32 | 25,51,75,100,125,150,175,200,250,
300,350,400,450,500 |
| 40 |
| 50 | 25,51,75,100,125,150,175,200,250,
300,350,400,450,500,600 |
| 63 |
| 80 | 25,51,75,100,125,150,175,200,250,
300,350,400,450,500,600,700,
750 |
| 100 |
| Diameter | Magnet switch | Tools of fixing the switch |
| | Tie rod type |
| 32,40,50 | AL-20R | p1-1 | PAC |
| 63,80 | p1-2 |
| 100 | p1-4 |
* Nonstandard strokes are available.
Hmbg front flange and HMBG rear flange(mm)
| Diameter | Flange | ΦD | A | B | UF | TF | H | W |
| Φ32 | F32 | Φ7 | 50 | 32 | 79 | 64 | 10 | 15 |
| Φ40 | F40 | Φ9 | 55 | 36 | 90 | 72 | 10 | 11 |
| Φ50 | F50 | Φ9 | 70 | 45 | 110 | 90 | 12 | 11 |
| Φ63 | F63 | Φ9 | 80 | 50 | 120 | 100 | 12 | 11 |
| Φ80 | F80 | Φ12 | 100 | 63 | 153 | 126 | 16 | 16 |
| Φ100 | F100 | Φ14 | 120 | 75 | 178 | 150 | 16 | 16 |
Remark:
1. Front flange and rear flange are the same
2. Flange of HMB series cylinder and flange of HC95 series cylinder are the same.
| Diameter | Middle axie pin | TL | TM-0.1-0.2 | ΦTD | ΦUW | L | XV |
| Φ32 | T32 | 12 | 50 | Φ12e9 | Φ49 | 18 | 67 |
| Φ40 | T40 | 16 | 63 | Φ16e9 | Φ58 | 22 | 6 |
| Φ50 | T50 | 16 | 75 | Φ16e9 | Φ71 | 24 | 70 |
| Φ63 | T63 | 20 | 90 | Φ20e9 | Φ87 | 28 | 70 |
| Φ80 | T80 | 20 | 110 | Φ20e9 | Φ110 | 34 | 89 |
| Φ100 | T100 | 25 | 132 | Φ25e9 | Φ136 | 40 | 89 |
Remark:The middle Axie pin of HMB Series cyliner and the middle axie pin of HC95 series cylinder are the same.
| HMBWB Double Poston Rod(mm) | | | | | | |
| Diameter | ZY | H | F | Φd | MM | I | A | M |
| Φ32 | 178 | 47 | 13 | Φ12 | M10*1.25 | 19.5 | 22 | 5 |
| Φ40 | 186 | 51 | 13 | Φ16 | M14*1.5 | 27 | 30 | 8 |
| Φ50 | 210 | 58 | 14 | Φ20 | M18*1.5 | 32 | 35 | 9 |
| Φ63 | 210 | 58 | 14 | Φ20 | M18*1.5 | 32 | 35 | 9 |
| Φ80 | 258 | 72 | 20 | Φ25 | M22*1.5 | 37 | 40 | 10 |
| Φ100 | 258 | 72 | 20 | Φ30 | M26*1.5 | 37 | 40 | 10 |
